Resolution Of Problems - Teuco S01 Manuel De L'utilisateur

EN INSTRUCTIONS FOR USE
SOUND FUNCTIONS
CONNECTION OF THE AUDIO SOURCE (BLUETOOTH®)

RESOLUTION OF PROBLEMS

Irregularity encountered
Cannot hear the audio.
The source does not connect
with the central unit.
The audio output is weak with
little or no bass.
The sound is distorted.
20
Possible cause
Lack of electrical power.
Speakers not connected.
Lack of Bluetooth® connec-
tion.
Volume set at minimum of
the audio source.
The source does not have
the A2DP/AVRCP proto-
cols.
Another device is already
connected.
The loudspeakers have
been erroneously connec-
ted.
The volume of the source
is set at excessive values.
Solution
Connect electrical power supply.
Contact Technical Assistance.
Check connections.
Check the synchronisation between the
audio source and the amplifier
Increase the volume of the audio
source.
Check that the communication protocol
of the audio source is
compatible with the amplifier (refer
to audio device manual). Check for a
firmware update for the device.
Remove the connecation in use.
Check the connection of the loudspe-
akers respecting the sequence descri-
bed in this manual.
Lower the volume of the audio source.