Alarms - Teuco S01 Manuel De L'utilisateur

EN INSTRUCTIONS FOR USE
SECONDARY FUNCTIONS
INFO
In case of anomaly in the system, the crown will light up and the control panel will display a flashing
exclamation mark at the bottom.
- From the INFO MENU select the
ALARMS icon, using the arrows to move
the cursor.
- Press HOME or OK to view the
ALARMS MENU.
Panel displays
Amber LED lit. The alarms
menu reads:" pressure
switch "
Amber LED lit. The alarms
menu reads: "flow"
Red LED flashing.
alarms menu reads: "high
limit"
Red LED flashing.
alarms menu reads "over
temp"
Red LED flashing. The alarms
menu reads "probe temp
Red LED flashing. The alarms
menu reads "probe temp hi
limit"
Amber LED flashing. The
alarms menu reads "ERR44"
Amber LED flashing. The
alarms menu reads "ERR43"
38
Call the technical assistance service.
Clean the filters as illustrated in the user's manual
for the tub/minipool and if the problem persists, call
the technical assistance service.
The The water is too hot, leave it to cool and if the
problem persists, call the technical assistance
service.
The The water is too hot. Leave it to cool, clean the
filters as described in the tub's user's manual and if
the problem persists, call the technical assistance
service.
The water is too hot; switch off the system and
leave the water to cool. Switch on the system
again and if the problem persists, call the technical
assistance service.
The water is too hot; switch off the system and
leave the water to cool. Switch on the system
again and if the problem persists, call the technical
assistance service.
Too much water in the tub compared to the dimensions
of the tub/minipool or to the number of users.
Turn off any taps and partially empty the tub/minipool.
If the problem persists, call the technical assistance
service.
No cold water is flowing to the filling device. Check
the correct installation and the actual availability of
cold water (<20°C).
If the problem persists, call the technical assistance
service.

ALARMS

Solution