The auto function serves to start the main system functions quickly. The first time it is started, it will be
activated with the default settings; after that the functions will be activated with the values set previously
from the control panel.
The functions activated with the auto button are as follows:
AUTOMATIC FILLING (if present, at a default temperature or at the temperature previously set from the
control panel), MASSAGE (if present, at the maximum speed or at the speed previously set from the
control panel), PERIMETER LIGHTING (if installed), SPOTLIGHT/CHROMOTHERAPY (if present) and
WATER SANIFICATION (if installed).
- From READY MENU press the AUTO
button.
- With the tub/minipool empty, start the
automatic filling function (if available).
- The automatic filling icon will flash to
show that the function is active and the
panel will read H2O.
- When the level has been reached, the
automatic filling function will stop and
the panel will return to READY MENU.
- From READY MENU press the AUTO
button.
- The massage function (if available),
the perimeter lighting (if available), the
spotlight (if available) and the water
sanification function (if available) will all
start
- The flashing icons indicate that the
functions are active.
- To stop the functions early, press EXIT.
The function will stop. The display will
return to the MAIN MENU with low-
intensity lighting.
BEFORE STARTING THE AUTO FUNCTION, SEE THE SECTION ABOUT AUTOMATIC FILLING.
BEFORE STARTING THE AUTO FUNCTION, IF THE SYSTEM DOES NOT HAVE AN AUTOMATIC FILLING FUNCTION,
FILL THE TUB/MINIPOOL BY HAND AS DESCRIBED IN THE TUB/MINIPOOL USER'S MANUAL.
IF THE AUTO FUNCTION IS ACTIVATED FROM THE MAIN MENU, THE FUNCTIONS WILL START UP BUT THE
DISPLAY WILL NOT PASS TO THE READY MENU MODE.
IF THE AUTO FUNCTION IS ACTIVATED FROM THE MAIN MENU, TO QUIT THE FUNCTION, PRESS THE EXIT
BUTTON TWICE (ONCE TO PASS TO THE READY MENU MODE AND ONCE TO DISACTIVATE THE FUNCTION).
INSTRUCTIONS FOR USE
STARTING THE SYSTEM
AUTO FUNCTION
EN
AUTO
11