Spring - Teuco S01 Manuel De L'utilisateur

EN INSTRUCTIONS FOR USE
SPA FUNCTIONS
The spring function transforms the product into a natural source of wellness and guarantees continued
water filtering and heating. It is possible to customise the effect of the spring by changing its capacity.
- The SPRING function is active during
the filtration cycles. Adjust the filtration
cycle settings and duration to manage
the function according to the desired
methods.
- From READY MENU select the
SPRING icon, using the arrows to move
the cursor and pressing OK to access
the SPEED ADJUSTMENT MENU.
- Change the SPRING speed using the
UP-DOWN arrows.
- If no buttons are pressed for 5 seconds
the panel will return to READY MENU
mode.
- To return to READY MENU mode press
EXIT.
- To return to the MAIN MENU press
EXIT.
THE "SPRING" FUNCTION CAN BE TEMPORARILY DEACTIVATED BY ACTIVATING THE "LOCK30" FUNCTION.
ELECTRICITY CONSUMPTION VARIES ACCORDING TO THE POWER SET FOR THE "SPRING" FUNCTION.
DURING THE "FILTER", "PURGE" AND "FILTER PLUS" FUNCTIONS, THE USER SETTINGS FOR THE "SPRING"
FUNCTION ARE TEMPORARILY DISABLED.
24

SPRING

5sec.