Mercedes-Benz A4708510600 Notice D'utilisation page 12

03F018-17_Ladeflächen-Trennsystem_X-Klasse_book.book Seite 10 Freitag, 17. November 2017 3:16 15
Operation
10
Operation
3
Overview
1 Separating board
2 Mercedes-Benz logo
3 Thumb screws
4 Suspending mounts
2
1
4
3
4
Moving the load area dividing system
Loosen thumb screws 3 on suspending
X
mounts 4.
Grip separating board 1 in the middle and
X
slide it into the desired position.
Re-tighten thumb screws 3 on
X
suspending mounts 4.
Securing a load
The load area dividing system is not a
substitute for correctly securing loads.
Observe the instructions on loading the
vehicle as described in the „Seats and
stowage" section of the vehicle Operating
Instructions.
Do not attach lashing materials to the load
area dividing system. There are lashing
eyelets on the load area which are intended
for securing loads.
M+P-03F-9452