Frequencies [ Hz] - Chauvin Arnoux C.A 5210 G Mode D'emploi

Connect the leads to the multimeter and in parallel to the circuit to be tested.
Place the selector switch on the Hz voltage frequency function
Automatic range selection : read the measured value
NB : The bargraph is non-operational on frequency measurement
If necessary, press the following buttons
- MIN.MAX to read the max or min value
- to light the display
FREQUENCIES
Hz
Resolution
Accuracy
Permitted
overload
Operating range
(1) The RANGE button on this function selects the trigger level :
10 mV, 100 mV or 1V (10 mV is selected when the instrument is
switched on).
FREQUENCIES
(C.A 5220 G only)
(extension to 10 000 counts)
100 Hz 1 kHz
0.01 Hz 0.1 Hz
± 0.1 % reading ± 2 counts
600 V rms and 900 V peak
26
10 kHz 100 kHz 200 kHz
1 Hz 10 Hz
4 V to 600 V
100 Hz