Chauvin Arnoux C.A 5210 G Mode D'emploi page 22

(C.A 5220 G only)
To switch On and Off the lighting of the display.
NB : Auto Off after 5 minutes.
3 - FUNCTION SELECTOR SWITCH
OFF Off position
V DC and AC voltages up to 600 V, with high impedance : 10 MΩ
V elec AC voltages up to 600 V, with low impedance : 270 kΩ
NB :
Adp (C.A 5210 G only)
Adaptor input : 400mV DC ; to receive themeasurement accessories with mV DC
output. The value is displayed without indication of the mV unit for ease of reading
(in °C, in lux, ...)
Hz (C.A 5220 G only)
Frequencies of voltages, up to 200kHz
Ω Ω Ω Ω Ω
Continuity sound test for a resistance ≤ 40 Ω, and resistance measurements up
to 40 MΩ
The continuity test is selected automatically when the instrument is swiched On.
Diode test. Measures the voltage of the junction in forward direction.
Capacitances up to 40µF
A (C.A 5220 G only)
10A DC and AC current ranges (via the 10A terminal)
mA (C.A 5220 G only)
Current ranges up to 400mA DC and AC (via the + terminal)
4 - TERMINALS
4mm diameter safety terminals
COM : common, terminal receiving the black lead
+ : terminal receiving the red lead
10 A (C.A 5220 G only) : terminal receiving the red lead for the 10A DC and
AC ranges
Also available on DC voltage.
20