Capacitances - Chauvin Arnoux C.A 5210 G Mode D'emploi

Never measure a capacitance on a live circuit.
Always respect the polarity of electrolytic condensors.
This type of condenser may be sensitive to temperature,
so avoid touching it during measurement.
Connect the leads to the multimeter and to the terminals of the condenser.
Place the selector switch on the capacitance meter function
Automatic range selection : read the measured value
NB : The bargraph is not operational during capacitance measurement.
Memorise the value, if necessary, by pressing the HOLD button.
C.A 5220 G only
If necessary, press the following buttons :
RANGE to select the ranges manually
to light the display
MIN.MAX to read the min or max values

CAPACITANCES

Resolution
Precision
Protection
(1) Min measurement : 400pF.
CAPACITANCES
4 nF 40 nF
(1)
1 pF 10 pF
± 3 % R ± 3 % R
± 400 ± 25
counts counts
500 V rms and 750 V peack
400 nF
100 pF
± 5 % reading ± 15 % R
± 10 counts
25
.
4 µF 40 µF
1 nF 10 nF
± 10
counts