Nilfisk SLX 025 Mode D'emploi page 10

Please read these essential instructions
SLX 025 are designed, developed and
rigorously tested to function efficiently and
safely when properly maintained and used in
accordance with the following instructions.
These instructions have been prepared with
safety and efficiency paramount.
The MACHINE OPERATOR must be trained
by a suitably qualified instructor, and be made
aware of the relevant regulations and legislation
currently in force at the time of use.
CAUTION - This machine MUST NOT be used
in explosive or inflammable atmospheres or
where such atmospheres are likely to be
produced by the presence of volatile liquid or
inflammable gas or vapour.
CAUTION - In no circumstances should the
power supply cord be wrapped around fingers
or any part of the operators person.
CAUTION - The electrical supply plug must not
be subjected to undue stress by pulling on the
power supply cord.
Your MACHINE must only be connected to an
electrical supply of the same voltage and
frequency as indicated on the rating plate.
Ensure that the plug fitted to the end of the
power supply cord is suitable for your supply
socket, if not refer to the information contained
in 'Electrical Connections', or consult a qualified
electrician. The electrical installation from which
the supply is drawn must be maintained to
current Institute of Electrical Engineers wiring
regulations.
10
(Only applicable to UK)
REGULAR SERVICING and INSPECTION of
your machine must be carried out by suitably
qualified personnel in accordance with rele-
vant legislation and regulations. In particular,
electrical tests for earth continuity, insulation
resistance, and condition of the flexible cord
should be checked frequently. In the event of
any defect the machine MUST be withdrawn
from service, completely checked and repaired.
Trained Service Engineers will be pleased to
carry out on site servicing on a regular or as
requested basis, to ensure the continuing safety
and efficiency of your machine.