Important Safety Instructions; Operator Training - Kärcher BD 50 R Classic Mode D'emploi

NOTICE:
This device complies with Part 15 of
the FCC Rules and Industry Canada
licence-exempt RSS standard(s)
Operation is subject to the following
two conditions:
(1) this device may not cause harm-
ful interference, and
(2) this device must accept any inter-
ference received, including interfer-
ence that may cause undesired oper-
ation.
NOTICE:
Changes or modifications made to
this equipment not expressly ap-
proved by Kärcher may void the FCC
authorization to operate this equip-
ment
NOTE: This equipment has been
tested and found to comply with the
limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harm-
ful interference in a residential instal-
lation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used
in accordance with the instructions,
may cause harmful interference to ra-
dio communications. However, there
is no guarantee that interference will
not occur in a particular installation. If
this equipment does cause harmful
interference to radio or television re-
ception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct
the interference by one or more of the
following measures
• Reorient or relocate the receiving
antenna.
• Increase the separation between
the equipment and receiver.
• Connect the equipment into an out-
let on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experi-
enced radio/TV technician for help.
IMPORTANT SAFETY
INSTRUCTIONS
Read all the instructions before using
the product.
WARNING
To reduce the risk of fire, electric
shock, or injury:
1 Do not leave the unit when plugged
in. Unplug from outlet when not in
use and before servicing.
2 To reduce the risk of electric shock
use indoors only.
3 Do not allow to be used as a toy.
Close attention is necessary when
used near children.
4 Use only as discribed in this manu-
al. Use only manufacturer's recom-
mended attachments.
5 Do not use with damaged cord or
plug. If the unit is not working as it
should, has been dropped, dam-
aged, left outdoors, or dropped into
water, return it to a service center.
6 Do not pull or carry by cord, use
cord as a handle, close a door on
cord, or pull cord around sharp edg-
es or corners. Do not run the unit
over cord. Keep cord away from
heated surfaces.
7 Do not unplug by pulling on cord. To
unplug, grasp the plug, not the
cord.
8 Do not handle plug or unit with wet
hands.
9 Do not put any object into openings.
Do not use with any opening
blocked; keep free of dust, lint, hair,
and anything that may reduce air
flow.
10 Keep hair, loose clothing, fingers,
and all parts of body away from
openings and moving parts.
11 Turn off all controls before unplug-
ging.
12 Use extra care when cleaning on
stairs.
13 Do not use to pick up flammable or
combustible liquids, such as gaso-
line, or use in areas where they may
be present.
14 Connect to a properly grounded
outlet only. See Grounding Instruc-
tions.
SAVE THESE INSTRUCTIONS!
GROUNDING INSTRUCTIONS
This product must be grounded. If it
should malfunction or breakdown,
grounding provides a path of least re-
sistance for electric current to reduce
the risk of electric shock. This product
is equipped with a cord having an
equipment-grounding conductor and a
grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in
accordance with all local codes and or-
dinances.
DANGER
Improper connection of the equipment-
grounding conductor can result in a
risk of electrocution. Check with a qual-
ified electrician or service personnel if
you are in doubt as to whether the out-
let is properly grounded. Do not modify
the plug provided with the product - if it
1
-
EN
will not fit the outlet, have a proper out-
let installed by a qualified electrician.
Do not use any type of adapter with
this product.
This appliance is for use on a nominal
120-volt circuit and has a grounding at-
tachment plug that looks like the plug
illustrated in sketchpicture A. Make
sure that the appliance is connected to
an outlet having the same configura-
tion as the plug. No adaptor should be
used with this appliance.
CONNECT TO A PROPERLY
GROUNDED OUTLET ONLY
1 Grounded outlet
2 Grounded outlet box
3 Grounded pin
OPERATOR
QUALIFICATIONS
Only trained and authorized persons
shall be permitted to operate a pow-
ered floor scrubber. Operators of pow-
ered floor scrubbers shall be qualified
as to visual, auditory, physical, and
mental ability to operate the equipment
safely.

OPERATOR TRAINING

Personnel who have not been trained
to operate powered floor scrubbers
may operate a floor scrubber for the
purposes of training only, and under
the direct supervision of the trainer.
This training should be conducted in an
area away from other trucks, obsta-
cles, and pedestrians.
The operator training program should
include the user's policies for the site
where the trainee will operate the floor
scrubber, the operating conditions for
that location, and the specific floor
scrubber the trainee will operate. The
training program shall be presented to
all new operators regardless of previ-
ous experience.
The training shall inform the trainee
that:
A The primary responsibility of the op-
erator is to use the powered floor
scrubber safely following the in-
structions given in the training pro-
gram.
3