T-Fal Actibread Manuel D'utilisation page 26

DELAYED START PROGRAM
You can program the appliance to start up to 15 hours in advance to have your preparation ready at the
time you want. This function cannot be used on programs 1, 2, 3, 7, 11, 12, 13, 14, 15.
This step comes after selecting the program, browning level and weight. The program time is displayed.
Calculate the time difference between the moment when you start the program and the time at which you
want your preparation to be ready. The machine automatically includes the duration of the program cycles.
Using the and buttons, display the calculated time ( up and down). Short presses change the
time in intervals of 10 min + a short beep. Holding the button down gives continuous scrolling in 10-min
intervals.
For example, it is 8 pm and you want your bread to be ready for 7 am the next morning. Program 11:00 using
the and . Press the button. A beep is emitted. The timer colon blinks. The countdown begins. The
operating indicator light comes on.
If you make a mistake or want to change the time setting, hold down the button until it makes a beep.
The default time is displayed. Start the operation again.
With the delayed start program do not use recipes which contain fresh milk, eggs, sour cream, yogurt, cheese
or fresh fruit as they could spoil overnight.
Practical advice
If there is a power cut: if, during the cycle, the program is interrupted by a power cut or mishandling, the
machine has a 7-min protection time during which the settings are saved. The cycle starts again where it
stopped. Beyond that time, the settings are lost.
If you plan to run a second program to bake another loaf, open the lid and wait 1 hour before beginning
the second preparation.
To turn out your loaf of bread: it may happen that the kneading paddle remains
stuck in the loaf when it is turned out. In this case, use the hook accessory as follows:
> once the loaf is turned out, lay it on its side while still hot and hold it down with
one hand, wearing an oven mitt,
> with the other hand, insert the hook in the axis of the kneading paddle - M,
> pull gently to release the kneading paddle - M,
M
> turn the loaf upright and stand on a rack to cool.
26