Operation With A Dcc Command Station; Pro - Roco BR 03 0058-2 Série Manuel

▪ Combinations for CV29
CV29 Bit 0
Direction of
Travel
normal
other way
round
normal
other way
round
normal
other way
round
normal
other way
round

▪ Operation with a DCC Command Station

As the multi MAUS/ multi MAUS
operated.
Programming modes:
The locomotive and carriages react to all DCC programming modes.
We recommend: direct CV programming (byte by byte) or POM mode (programming on main track).
The programming is described in the multi MAUS/ multi MAUS
Reading CVs:
With the appropriate equipment (e.g. Rocomotion 10785 / multi zentrale
by byte and bit by bit.
▪ More Functions
You can find out about a range of other possible set-tings, which are probably very rarely needed, rela-
ting to drive speed curve, load control setting or noise synchronization from the detailed handbook.
This can be downloaded as a pdf document MX6462P from www.zimo.at
Bit 1
Speed Steps Operating Mode
14
14
28/128
28/128
14 analogue+digital
14 analogue+digital
28/128 analogue+digital
28/128 analog+digital
(
multi MAUS/ multi MAUS
has 20 function keys and a light button, can be especially comfortably

pro

Bit 2
Value
Short adresse
digital 0
digital
digital 2 (default)
digital
4
6
)
pro
manual.
pro
), you can read the value byte
pro
Bit 5
Value
Long adresse
32
1 33
34
3 35
36
5 37
38
7 39
29
29