Installation And Adjustment; Tools; Manner Of Delivery - Vermeiren EZ1 Mode D'emploi

1. Set the seat in a horizontal position and the backrest vertically.
2. Remove footrests, armrests and accessories (ex. headrest, ...).
3. Store footrests, armrests and accessories safely.
4. If possible, fold the wheelchair and remove the wheels.
5. Place the wheelchair in the luggage place with 2 persons.
6. If the wheelchair and the passenger compartment is NOT separated, attach the
frame of the wheelchair securely to the vehicle. You can use the available safety
belts in the vehicle.
7. Place the patient in the recommended existing seats with their seatbelt systems.
3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren multifunctional wheelchairs EZ1 has been designed entirely for your comfort.
This wheelchair can be adjusted to individual requirements as explained below.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L L L L
WARNING:
Risk of unsafe settings - Use only the settings described in this
manual.
L L L L
WARNING:
Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1

Tools

To set up the wheelchair the following tools are needed.
•
Wrench set n° 10 to n° 19
•
Allen key set n° 4 to n° 5
3.2

Manner of delivery

The Vermeiren EZ1 shall be delivered with:
•
1 frame with armrests, rear and front wheels
•
1 pair footrests
•
Anatomical seat (fixed)
•
Anatomical backrest (fixed)
•
Tools
•
Manual
•
Accessories
Check after receiving the goods, the completeness and functionality of the delivered product.
Warranty claims are only valid if they are mentioned to the manufacturer within a period of
two weeks in writing. For latent defects warranty claims apply only if they are mentioned to
the manufacturer within a period of two weeks after discovery.
Page 14
EZ1
2012-12