Metz mecablitz 52 AF-1 Nikon digital Mode D'emploi page 160

Resetting to auto-zoom
• Touch the shutter release to begin a data
• Press the
• Press the
• Press the
EV
ZOOM
• Press the
k • Press the
A.Zoom
24
After around 10 seconds, the operation
display appears, or press the
repeatedly until the operation display
appears.
160
transfer between the flash unit and the
camera.
D
button as often as it takes
for the selection menu to appear.
PARA
sensor button on the
touch display.
sensor buttons on the
touch display and select "Zoom".
Zoom
sensor button on the
touch display.
sensor buttons on the touch
A.Zoom
display and select .
D
button
+
Wide-angle diffuser
With the wide angle diffuser
of 12 mm or more can be illuminated (35 mm
format).
Pull the wide-angle diffuser
the reflector as far as it will go, and then
release it.
The wide-angle diffuser automatically
folds downwards. The reflector automatically
moves to the required position.
The distance readings and the zoom value
are corrected to 12 mm on the display panel.
The automatic adjustment of the motor-zoom
reflector is not activated if the wide-angle
diffuser is in use.
To insert the wide-angle diffuser
upwards 90° and push it all the way in.
mecabounce Diffuser MBM-02
If the Mecabounce (optional accessories, see
18) is fitted to the reflector of the flash unit,
the reflector is automatically guided to the
position required. The distance data and
zoom factor are corrected to 16 mm.
The automatic adjustment of the motor-zoom
reflector is not activated if the Mecabounce
is in use.
The simultaneous use of the wide-angle dif-
fuser and the Mecabounce is not possible.
, focal lengths
out from
, turn it