Setting The Flash Mode On The Master Flash Unit; Exposure Correction (Ev) In E Ttl Mode Settings On The Master Flash Unit - Metz mecablitz 52 AF-1 Canon digital Mode D'emploi

10.1.2 Setting the flash mode on the master
REMOTE
• Press sensor button
E TTL
MASTER
RATIO Off
INFO A+B+C
• Press the
MASTER
On / Off
MODE
• Use the sensor buttons
EV
• Press the sensor button on the touch
E TTL
M
k
The set mode of operation is adopted
REMOTE
M
immediately.
MASTER
1/1
4 1/1
A
4 1/1
B
4 1/1
C
INFO A+B+C
168
flash unit
E TTL
or
touch display for the flash mode until the
selection for the master flash unit appears.
MODE
sensor button on the
touch display.
the mode to "E TTL" or "M".
display for the desired mode of operation
E TTL M
or alternatively .
M
REMOTE
on the
E TTL
MASTER
RATIO Off
INFO A+B+C
MASTER
On / Off
MODE
to set
EV
+ 2 / 3
+ 1
+ 1 1 / 3
REMOTE
E TTL
MASTER
RATIO Off
INFO A+B+C
10.1.3 Exposure correction (EV) in E TTL mode
settings on the master flash unit
• Press sensor button
display for the flash mode until the selecti-
on for the master flash unit appears.
EV
• Press the sensor button on the touch
display.
• Press the
touch display and set the desired exposure
correction (e.g. +1).
• Press the sensor button for the desired
exposure correction value
The setting is adopted immediately.
+1
E TTL
on the touch
sensor buttons on the
+1
.