Preparing The Flash Unit For Use; Mounting The Flash Unit; Power Supply - Metz mecablitz 26 AF-1 digital Mode D'emploi

It is impossible to describe all camera types and their
individual dedicated flash functions within the scope of
these instructions. Therefore, please refer to the flash
mode description in your camera's operating instruc-
tions to find out which functions are supported and
which ones have to be set manually on the camera.
Using lenses not equipped with a CPU (i.e., lenses
without auto focus mode), results in certain functional
limitations!
k
90

3 Preparing the flash unit for use

3.1 Mounting the flash unit

Mounting the flash unit on the camera
Turn off the camera and flash before mounting or
removing.
• Press and hold button
together with the connection base, into the camera's
hot shoe as far as possible.
• Release button – the flash unit is now locked.
In camera housings which have no locking hole, the
spring-loaded locking pin retracts into the housing of
the flash unit to avoid damage to the surface.
Removing the flash unit from the camera
Turn off the camera and flash before mounting or
dismounting.
• Press and hold button
with the connection base from the camera.

3.2 Power supply

Suitable batteries/rechargeable batteries
The flash unit can be operated with any of the following
batteries:
and slide the flash unit,
and remove the flash unit