Parts Of The Mask; Fitting The Mask - ResMed MIRAGE 2 Série Mode D'emploi

P M
ARTS OF THE ASK
Mask
frame
Mask
port
Luer lock
port cap/s
Tapered
fitting
Figure 1: Mask Parts
Top Velcro strap
Side
upper
Velcro
straps
Quick
R e l e a s e
Tab
Figure 2: Headgear
4
Cushion
Mask
clip
cushion
Side lower
Velcro
straps
F M
ITTING THE ASK
The M NV F F M
IRAGE ULL ACE ASK
fully assembled.
Fitting the mask correctly is essential to optimum
therapy delivery. Use the ResMed Mask Fitting
Template to help you choose the best mask size for
your patient.
1 Connect the mask to the ventilator system by
following the ventilator system operating
instructions and/or physician's prescription.
2 Seat the mask cushion over the patient's nose and
mouth. On most patients, the bottom of the
cushion should rest below the lower lip and the top
of the cushion on the bridge of the nose, between
the eyes.
3 Pull the headgear over the patient's head. Make
sure the side lower Velcro
patient's ears, and that the side upper Velcro straps
pass over their forehead.
S 2 is supplied
ERIES
® straps pass below the