Product Description - 3M DBI SALA 8000000 Manuel D'utilisation

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the Inspection and
Maintenance Log (Table 2) at the back of this manual.
;
Always ensure you are using the latest revision of your 3M instruction manual. Visit the 3M website or contact 3M Technical Services for
updated instruction manuals.

PRODUCT DESCRIPTION:

Figure 1 illustrates the 3M™ DBI-SALA© Confined Space Aluminum Tripod. The Tripod is a single point anchorage connector for a Fall Arrest system
designed to be installed over an opening and meant to lower and raise the user into and out of the opening. The tripod is constructed of lightweight
tubular aluminum legs with an aluminum head assembly and steel chain. The tripod can be combined with a variety of pulleys, winches, and fall
arrest devices to meet a wide range of confined space entry, retrieval, and rescue requirements. Quick release pins at all adjustment points provide
tool-less setup and adjustment. The Tripod can be used as a support structure for various types of safety devices. Some of these can mount
directly to the anchor point at the top of the tripod head, while others may require an adapter bracket.
Figure 2 illustrates components of the Tripod. See Table 1 for Component Specifications. The Tripod Hoist is comprised of three Adjustable Legs (I)
with a Head Assembly (C) at the top of the Legs. The Legs are operable through manipulation of the Leg Locking Pins (F) and Quick Mount Bracket
(H), and are grounded by padded Feet (K). Once set, the Legs are secured using the Safety Chain (L). The Eye-Bolt Anchorage Bolt (E) below the
Head Assembly is used for installation of a winch or SRD for rescue or retrieval purposes.
System Specifications:
Capacity: One persons with a combined weight (clothing, tools, etc.) of no more than 310 lb. (140 kg).
Anchorage:
Fall Protection System
Fall Arrest
Restraint
Work Positioning
Rescue
Dimensions: See Figure 1 for the dimensions of the Tripod.
Maximum Working Load: 350 lb. (158 kg).
Product Weight:
Model
8000000
8000010
Standards: ANSI Z359.4; ANSI Z359.1; ANSI Z117.1; OSHA 1910.140; OSHA 1926.502
Component Specifications:
Figure 2 Reference Component
A Pin
B Pulley
C Head
D Leg Lock
E Eye-Bolt Anchorage Point
F Labels
G Quick Mount Bracket
H Adjustable Leg
I Leg Locking Pin
J Foot
K Safety Chain
Figure 1
Reference
Minimum Height
Height 3 in. (7.6 cm)
Increments
Hole Diameter 23 in. (58.4 cm)
Span* (A)
Overall Height 68 in. (172.7 cm)
(B)
Available Lift 49 in. (124.5 cm)
Height (C)
Table 1 – Specifications
Certified Anchorage
2 times maximum arresting force
2 times foreseeable force
2 times forseeable force
5 times applied load
Tripod Dimensions
8000000
Maximum Height
32 in. (81.3 cm)
93 in. (236.2 cm)
74 in. (188 cm)
9
Non-Certified Anchorage
5,000 lb. (22.2 kN)
1,000 lb. (4.4 kN) per ANSI
5,000 lb. (22.2 kN) per OSHA
3,000 lb. (13.3 kN)
3,000 lb. (13.3 kN)
Weight
47 lb. (21 kg)
56 lb. (25 kg)
Materials
Zinc-plated steel
Zinc-plated steel
Aluminum
Zinc-plated steel
Zinc-plated steel
Polyester and polycarbinate laminate
Zinc-plated steel
Aluminum
Zinc-plated steel
Aluminum
Zinc-plated steel
8000010
Minimum Height
3 in. (7.6 cm)
33 in. (83.8 cm)
95 in. (242.3 cm)
76 in. (193 cm)
Standard
ANSI, OSHA
ANSI, OSHA
ANSI, OSHA
ANSI
Maximum Height
44 in. (111.7 cm)
120 in. (304.8 cm)
101 in (256.5 cm)