MRA 4025066161089 Instructions De Montage page 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
4 Brackets
4 Plastic washers, 12 x 6 x 1 mm
4 Rubber nuts, M5
4 Plastic washers, 12 x 5 mm
4 Oval-head screws, black, M5 x 16 mm
1 Edge protection strip with end sleeves
How to mount the screen onto your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen (P1).
3. Mount the brackets with the original screws and 12 x 6 mm washers (P2).
4. Twist each metal bracket until the open side faces inward.
5. Insert the rubber washers into the brackets (P3).
6. Position the screen and fasten it with the screws and plastic washers (P4).
7. Slide the edge protection strip onto the exposed rear edge of the screen, starting where the
screen meets the fairing and ending on the other side of the screen. Cut any overhang off.
8. Slide the end sleeves over the end of the edge protection strip and gently squeeze the
sleeves with a pair of pliers to secure the edge protection strip.
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Kawasaki Versys X300 17-
Article No..
--- Allen keys, 3 and 5 mm
10671
10559
10629
10635
10554
---
3
Required tools