Possible Malfunctions - Bartscher 191.001 Mode D'emploi

7. Possible Malfunctions

CAUTION!
In the event of malfunctions during use, remove the plug from its socket.
MALFUNCTION
The unit is turned
on but not
functioning.
The unit is on, but
the control light is
not on.
The unit turns
itself off.
The above described problem cases are given for orientation and as examples.
Should these or similar problems occur, please turn off the machine immediately
and don´t use it anymore. In order to check and repair your machine, please
contact a qualified expert or the manufacturer immediately.
CAUSE
• Plug not in a socket.
• Fuse blown as other machines
requiring high levels of energy
were simultaneously
connected.
• Temperature regulator in the
wrong position.
• Damaged control light.
• Temperature regulator in the
wrong position.
• The overheating protection
has been activated, as there
is too little water in the
reservoir.
SOLUTION
• Insert plug into socket.
• Disconnect the unit
from its power source,
then replace the fuse.
• Turn regulator to the
proper position.
• Contact the sales agent
• Turn regulator to the
proper position.
• Leave the unit to cool
and fill with water.
- 37 -