Possible Malfunctions - Bartscher IK 20 Mode D'emploi

7. Possible Malfunctions

Error
Message
• There is no cookware on
E00
• The device becomes too
E01
• Parts are damaged (e.g.
• Overheating-protection was
E02
• Short-lasting power surge
E03
Cause
the heating plate or the
cookware is inappropriate
for induction cookers.
hot (e.g. due to blocked
ventilation slots).
transistor).
activated and the device
switched off.
or lower tension.
Solution
• Do not turn on the device when
there is no cookware placed on it
and only use cookware adapted
for induction cookers.
• Clear/unblock ventilation slots.
Let the device cool off for a few
minutes; the device is ready for
operation afterwards.
Contact the retailer in case the
error message remains indicated
in the digitaldisplay after the
device has cooled off.
• Contact retailer.
• Remove the cookware from the
hob. Let the device cool off for a
few minutes. The device is ready
for operation afterwards.
• Remove the device from the
socket (remove the plug!).
Re-connect the device after
several minutes.
- 31 -