Philips S95 Série Mode D'emploi page 29

3 Remove the shaving heads from the shaving
head holder. Each shaving head consists of a
cutter and guard.
Note: Do not clean more than one cutter and guard
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
4 Clean the cutter and guard under the tap.
5 After cleaning, place the cutter back into
the guard.
6 Put the shaving heads back into the shaving
head holder.
Note: Make sure the projections of the shaving heads
fit exactly into the recesses.
7 Place the retaining ring holder on the retaining
ring (1), place it on the shaving head (2) and turn
it clockwise (3) to reattach the retaining ring.
Repeat this process for the other retaining rings.
8 Reattach the shaving head holder to the
bottom part of the shaving unit.
ENGLISH
29