Philips S95 Série Mode D'emploi page 27

1 Press the button on the side of the SmartClean
system (1) and lift the top part of the
SmartClean system (2).
2 Take the empty cleaning cartridge from the
SmartClean system and pour any remaining
cleaning fluid out of the cleaning cartridge.
You can simply pour the cleaning fluid down the sink.
3 Throw away the empty cleaning cartridge.
4 Unpack the new cleaning cartridge and pull the
seal off the cartridge.
5 Place the new cleaning cartridge in the
SmartClean system.
6 Push the top part of the SmartClean system
back down ('click').
Cleaning the shaver under the tap
Clean the shaver after every shave for optimal
shaving performance.
Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
ENGLISH
27