Kränzle 41.068 Instructions De Service page 9

GB
9
Warranty
This warranty shall only apply to material and manufacturing defects. Normal wear shall
not be covered by warranty.
It is imperative that the sandblast injector be used in accordance with subject operating
manual which is an integral part of our warranty conditions.
For high-pressure cleaners sold to private users the warranty period is 24 months.
For high-pressure cleaners sold for industrial use the warranty period is 12 months.
In case of a warranty claim please contact your local dealer or nearest authorized customer
service center along with your purchase receipt or log on to www.kraenzle.com.
For safety and approval reasons the sandblast injec-tor must not in any way be converted or
modified. Otherwise any warranty claims will automatically expire; this also applies to any
operating errors. Any damages caused by non-compliance with this oper-ating manual will
cause the warranty to expire.
Technical Data / Part Numbers
Sandblast injector with inlet ST 30 nipple M 22 outside thread Part no. 41.068
- max. 250 bar (25 MPa), min. 120 bar (12 MPa)
- max. 19 l/min, min. 10 l/min
Sandblast injector length 370 mm
Suction lance length 620 mm
PVC hose length 3000 mm