Special Operation; Installation; Introduction - Cristec CPS 600-1A Manuel D'utilisation

CRISTEC
Floating indicator lights when the charge mode: "BOOST OFF" has been
selected and the charger is functioning correctly during the boost time or the
boost time is finished.
Boost indicator extinguishes steadily when the charge mode: "BOOST ON"
has been selected and the charger is functioning correctly during the boost time.

2.2.4.3 Special operation

Special batteries
The factory settings are for standard use of Lead/Antimony batteries. Refer to a
professional installer for special settings to match the battery manufacturer's
specifications, taking into account the special features of the installation.
Electricity generating sets
The CRISTEC battery charger is designed for use from an electricity generating
set.
In certain circumstances, electricity generating sets can generate large over-
voltages. Before connecting the charger, check that the charger is compatible with
the generator: power, voltage, voltage surges, frequency, current, ...

Installation

3.1 Introduction

This section deals with matters relating to charger installation.
Installation and operating the charger for the first time must be undertaken by an
electrician or professional installer in accordance with the standards in force (in the
case of pleasure boats, comply with the international standard ISO 13297).
The installer must take note of this operating manual and must inform users of the
matters relating to installation and safety contained in section 5.
CPS600DEA
Page 26