Installation And Connections; Reference Standards Applied - Cristec CPS 600-1A Manuel D'utilisation

CRISTEC

Installation and Connections

See plans in appendix.
When they leave the factory the chargers are configured as follows:
Mains supply: 230 Vac
Setting output voltage for Lead/Antimony battery
Charging mode : Boost then automatic switch to Floating
Output voltage setting in Floating:
at 13.8 V ± 1% off load for 12 V models
at 27.4 V ± 1% off load for 24 V models
Cable entry is via cable glands except.

1.5 Reference standards applied

The standards applied are:
NF EN 60950 + A1 + A2 (October 93):
NF EN 50081-1 (June 92) EMC:
NF EN 50082-1 (June 92) EMC:
NF EN 55022 (December 1994):
Enacted at Quimper on: 2 March 2001
CPS600DEA
safety
equipment including electrical office
equipment.
Generic standard for emissions
Generic standard for immunity
Limits and methods for measuring the
characteristics
produced by information processing
equipment.
For and on behalf of CRISTEC SA,
of information
of RF
Page 21
processing
interference