Clarity XLC3.4+ Guide De L'utilisateur page 32

Masquer les pouces Voir aussi pour XLC3.4+:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

XLC3.4+
Difficulty in placing or receiving calls:
Move closer to the base and try again.
Make sure you have selected the correct dialing mode, tone or pulse.
Make sure the AC adapter is not plugged into a wall outlet with other
appliances. Disconnect for 5-10 seconds then reconnect. Place the
handset back on the base and reinsert the AC adapter.
Make sure the handset battery is fully charged.
Your handset screen is displaying "Searching...":
Verify that the AC adapter is plugged into the base and into the wall
outlet.
The handset is out of range or the power to the base is unplugged.
Move closer to the base.
Place the handset into the base until the screen returns to standby
mode. It will take approximately 5-10 seconds for the handset to
register to the base5
Handset may need to be re-registered to the base manually. Follow
instructions on page 28.
Screen displays "Battery Low":
Handset batteries are low on charge; return the handset to the base to
rechargw the batteries.
TALK button is blinking green (fast pace):
The base is trying to locate the handset; press TALK to end the FIND
paging process and return the handset to the base.
Base POWER light blinks green once every second:
The power adapter may not be plugged in. Verify AC adapter is
plugged into proper wall outlet.
Base POWER light blinks green every five seconds:
The power adapter may not be plugged in. Verify AC adapter is
plugged into proper wall outlet.
The base batteries may be "low" (their charge). If necessary, replace
batteries.
30
TROUBLESHOOTING

Publicité

Table des Matières
loading

Table des Matières