Handset Registration - Clarity XLC3.4+ Guide De L'utilisateur

XLC3.4+
Handset
Needs
Registration
Hold Base
FIND Key
For 5 Secs
Then Press
MENU Key
Registering...
Registration
Successful
Register
Auto Talk
Voice Asst
Register
Register
Deregister
Register
Register
Deregister
HANDSET 1
Deregistered
28

HANDSET REGISTRATION

REGISTERING THE XLC3.4+
In order to use the XLC3.6+HS or XLC7HS handset (sold
separately), you must register it to the XLC3.4+ base.
Pull the handset's battery tab located on the bottom of
the device, and then press MENU to start registering or
deregistering your handset from your system.
TO REGISTER AN UNREGISTERED HANDSET
1. Press MENU to enter registration mode. You will see
displayed on the screen, "Handset Needs Registration."
2. Press and hold the FIND key on the XLC3.4+ base for
five seconds, until the base visual ringer starts flashing.
Release FIND key on the XLC3.4+ base.
3. Press MENU key on the handset.
4. The screen shows "Registering... ", then "Registration
Successful" (accompanied by five quick beeps).
5. Your handset is now registered to your XLC3.4+
system. Your screen will display "Handset X," (where
"X" is the number of the actual handset registered,
such as the second or fourth handset, etc.).
You can extend the number of handsets by using
additional XLC3.6+HS or XLC7HS handsets (sold
separately).
TO REGISTER YOUR HANDSET AGAIN (or to register to
a different XLC3.4+ system)
1. In standby mode, press MENU.
2. Press DOWN arrow five times to advance the row
reading "Phone Setup" to the top of the screen.
3. Press MENU to enter the setup section. The screen
displays "Register" on the screen's top row now.
4. Press MENU to enter the Registration section.
5. Press MENU again to select "Register."
6. Follow the Registration steps listed above.
TO DEREGISTER THE HANDSET
1. See the six steps listed above, then press MENU to
select "Deregister."
2. Your handset will deregister from your base as soon
as you press MENU. The screen will show "Handset
X Deregistered"(again, where "X" is the number
of the handset registered), then "Handset Needs
Registration."