Electric Heater Connection Schemes And Electric Power - Modine GME Série Manuel Technique

Electric heater connection schemes and electric power

Model with 4 mm fin spacing
Standard version
RBA1
N
N
L
L
Heaters Terminal box (internal)
GME Model 41GH4
41EH4
Total power W 450
Model with 7 mm fin spacing
Standard version
RBA1
RSB
N
N
L
L
Heaters Terminal box (internal)
GME Model 41GL7
41EL7
41FL7
Total power W 675
EDP versions W 900
L
N
P.E.
42GH4 43GH4
42EH4 43EH4
900 1330
L
EDP version
(optional)
N
N
P.E.
L
Heaters Terminal box (internal)
42GL7 -
42EL7 43EL7
42FL7 43FL7
1350 1995
1800 2660
Important
Application of adequate thermal control systems on feeder lines is mandatory.
Performance of all electric heaters must be periodically controlled to avoid dama-
ge due to ice build-up.
The manufacturer is not liable in any way for defects caused by non detected
malfunctions.
RBA1 - High power electric heaters in coil
44GH4
44EH4
P.E. = Heater sheath earth connection
1750
L
N
RBB1
RBA1
RSB
N
P.E.
L
RBA1 - High power electric heater in coil
-
RBB1 - Lower power electric heaters in coil
44EL7
RSB - High power electric heater on inner drip tray
44FL7
2625 P.E. = Heater sheath earth connection
3500
230V/1/50Hz Feed
230V/1/50Hz Feed
Important
Application of adequate thermal control
systems on feeder lines is mandatory.
Performance of all electric heaters must
be periodically controlled to avoid dama-
ge due to ice build-up.
The manufacturer is not liable in any
way for defects caused by non detected
malfunctions.
13
www modine com