Technical Data - Ritter MultiSchneider solida4 Mode D'emploi

Removing the rotary blade:
Remove the blade
guard (6).
Open the blade catch (5),
by turning it in a clockwise
direction.
• Remove the blade catch.
• Take hold of the rotary
blade (13) at its rotational cen­
tre and remove it.
Cleaning after each use
• Wipe down the housing and
all removed parts, including the
rotary blade, with a damp cloth.
Occasional cleaning
• Give all removed parts,
including the rotary blade, a
thorough wash in warm soapy
water (not in the dishwasher!).
• Clean the housing behind the
blade using a dry cloth/brush.
Note:
Do not use any abrasive
cleansers, sponges with rough
surfaces or hard brushes.
• Dry all parts that you have
washed.
• Grease the rotary blade's
gear wheel with a little Vase­
line.
Assembling the appliance
• Carefully insert the rotary
blade.
• Insert the blade catch.
• Close the blade catch by
turning it in an anticlockwise
direction.
• Mount the blade guard.
solida
4
Slide the slice carriage (3)
into the guide grooves on the
appliance.
solida / sono / sinus
5 5
Using a small amount of force,
push the slice carriage (3)
vertically into the guide groove
on the appliance until it audibly
locks into place.
MAINTENANCE
Your multi slicer is mainte­
nance­free. However, we
recommend that you occasion­
ally apply a little Vaseline to
the rails of the slice carriage
to keep them lubricated and
ensure that the carriage contin­
ues to move easily.
STORAGE
Keep the appliance out of the
reach of children.
solida / solida
4
To store the cable, always use
the cable compartment inte­
grated into the appliance.
DISpOSAL
At the end of its service
life this product may
not be disposed of as
part of normal domestic
waste. It must be taken to a
dedicated collection point for
recycling electrical and
electronic devices. This is
indicated by the symbol on the
product, the operating
instructions or the packaging.
The materials can be used
again in accordance with their
identification. The re-use,
material­sensitive recycling
or other forms of recycling of
old appliances enables you
to make a vital contribution to
protecting our environment.
Please consult with the dispos­
al office at your local authority.
REACH DIRECTIVE
See www.ritterwerk.de
5
SpECIAL ACCESSORIES
A special, non­toothed rotary
blade is also available for use
with sliced meat, sausage and
ham.
SERVICE, REpAIRS AND
SpARE pARTS
Please contact your local
after­sales service for all
service, repairs and spare parts
matters!
See www.ritterwerk.de

TECHNICAL DATA

This appliance complies with
the following regulations and
directives:
– 2004/108/EC
5 – 2006/95/EC
– 1935/2004/EC
– EuP 2009/125/EC
– 2011/65/EU
The appliance thus complies
with the CE specifications.
Mains voltage/power consump­
tion: Refer to the type label on
the underside of the appliance.
Slice thickness:
0 mm to approx. 23 mm
WARRANTY
This ritter appliance comes
with a two­year manufacturer's
warranty, starting with the date
of purchase and in accordance
with the EU warranty directives.
In the event of a warranty claim
or for servicing, the appliance
must always be sent to the
appropriate national customer
service centre.
English
11