Ritter MultiSchneider solida4 Mode D'emploi page 15

Risk of electric shock
– Always remove the mains plug
from the socket in the event of
a malfunction, before cleaning
and when the appliance is not
in use. When doing so, pull on
the plug and not on the cable.
– Never immerse the appliance
in water. Never expose the
appliance to rain or any other
form of moisture.
– If the appliance falls into water,
unplug the cable from the
mains socket before removing
the appliance from the water.
Have the appliance inspected
at an authorized service loca­
tion before using it again.
– Always ensure that your hands
are completely dry before
using the appliance. Do not
use the appliance if it is wet or
damp or while you are stand­
ing on a damp surface. Do not
use the appliance outdoors.
– Stop using the appliance
immediately if any parts are
damaged. In this case, send
the complete appliance to the
ritter after­sales service.
– If the mains cable is dam­
aged, it must be replaced by
the manufacturer, the manu­
facturer's after­sales service
or a similarly qualified person
to eliminate risk of personal
injury.
Risk of injury
– This appliance must not be
used without a slice carriage
or a left­over holder, unless
the size and shape of the food
to be sliced means that these
parts cannot be used.
– Before replacing accessories
or add­on parts that move
when operated, the appliance
must be switched off and dis­
connected from the mains.
– The rotary blade is extremely
sharp.
– Never touch the rotating blade
when operating the appliance!
– Switch the appliance off before
cleaning it; pull the mains plug
out of the socket and turn the
slice thickness adjustment
knob to the "0" position.
– The rotary blade will continue
to run for a short time after
being switched off.
English
9