International Dialling Codes; Roaming - NEC N400i Mode D'emploi

☛
With the Calls screen displayed, press 4. The Line ID screen is displayed with a ✔ over an activated line
and a ✘ over a deactivated line.
☛
Use the ▲ and ▼ keys to select a line to set the status of each line (see the table on the right). The line
will flash when selected.
☛
Press Softkey 1 to set the line identification on or off.
☛
Press to save the current settings.

International dialling codes

When you make an international call from any country, you must start by dialling a special international access code. Your phone has the facility to prefix
a + symbol to the numbers, so that you need not enter the access code for the country that you are calling from.
Entering international dialling codes
☛
With the standby screen displayed, hold down 0. The 0 character displayed will change to a + character.
☛
Key in the country code, area code, and phone number that you wish to call.
The UK country code is always 44, no matter what country you are dialling from. For example, a typical UK number of 01189 123456 is entered as:
International access country code
+ 44

Roaming

You will be charged for calls forwarded to you while roaming.
The roaming facility enables you to use your phone in many parts of the world and pay all charges through your normal service provider. Your network
operator usually has agreements with named networks in other countries so that automatic roaming can take place with these named networks. The
phone also allows you to set network preferences of your own.
When dialling, you will need to add the international access codes if required. So, storing all numbers with the codes (such as +44 for the UK) is helpful
(see page 12).
Before leaving your home country, you should select any preferences such as bar calls or call diversion.
☛
With the standby screen displayed, press
Setting Automatic or Manual network selection
☛
With the Network screen displayed, press 1 to display the Search type screen.
☛
Press 1 to select the automatic mode or 2 to select the manual mode.
Before you manually select a network, ensure it is covered under the agreement you have with your service provider.
area code phone number
1189 123456
1 and 8 to display the Network screen before performing the following procedures.
Line type Setting
Outgoing Send own #
Show connected #
Incoming Show Incoming #
Return own #
12