Basic Calls & Phone Use; Making Basic Calls; Ending A Call; Receiving An Incoming Call - NEC N400i Mode D'emploi

Basic Calls & Phone Use

Making basic calls

You make a simple call in the same way as you would with a normal phone, except that you need to press
phone number. To make international calls, you must first enter the international dialling code (see page 12).
Use the full STD area code even if you are calling to a person in the same town. If the numbers are too long to be displayed within one line, excess
part is deleted and '...' is added at its end.
The main-LCD display shows the strength of the radio signal that links your phone to the network. The maximum signal strength is shown by 4 shaded
blocks and the minimum signal strength by 1 block.
Starting a call
☛
Key in the phone number. Check the number on the display.
☛
Press to send the input number to start the call.
When the call is sent, the screen displays the number called or the name stored in the phonebook and a connection graphic or a CLI picture that has
been allocated to the number called (see page 54).
Correcting mistakes
Use the and keys to move the cursor and then press CLR to clear individual digits, or hold down CLR to completely clear a phone number.

Ending a call

☛
While talking, press
If is held down, your phone will turn off.
When you use the headset, you can also end a call by pressing and hodling the button on it.

Receiving an incoming call

When someone calls your number, the ringer will sound (if set - see page 22), the LED glows in the specified colour, and the phone number of the caller
may be displayed if the calling line identification facility is available and the caller has activated the feature. If the caller's phone number has been related
and stored in your phonebook with a name and a CLI picture (see page 57), that name and picture will be displayed. If the caller has withheld their identity,
the screen will give a message that the caller's number is being withheld.
You also have options for holding and forwarding calls. These options depend on your network and your subscription arrangements.
5
briefly or close your phone. The phone returns to the standby screen.
after entering the area STD code and the