Putting A Call On Hold; Unsuccessful Calls; Emergency Calls; Last Number Redial - NEC N400i Mode D'emploi

Accepting an incoming call
☛
While receiving an incoming call, press
When you use the headset, you can also accept an incoming call by pressing the button on it.
Rejecting an incoming call
☛
While receiving an incoming call, press
When you use the headset, you can also reject an incoming call by pressing and holding the button on it.
If your phone receives a call and you do not answer it, the screen will display the phone number (or the name if stored) of the caller (if available). This
information is stored in the missed calls list. Up to 10 missed calls are stored in this list.
You can set your phone to answer a call when any key is pressed (see "Any key answer" on page 19).
If you are making a call, the phone gives priority to receiving a call unless you have already pressed
See also: "Call diversion" on page 10 and "Call waiting and holding" on page 11.
See also: "Call options" on page 8.

Putting a call on hold

You can put the received or dialled call on hold by pressing Softkey 1. To retrieve the call, press Softkey 1 again.

Unsuccessful calls

If dialled call is not successfully connected, the display will give an appropriate message.
If your phone has the auto redial function activated, the number will be automatically called again after a short delay (see page 11).

Emergency calls

The standard emergency number of 112 can be used.
☛
Key in 1 1 2.
☛
Press to connect the call to the local emergency services.
On some networks, emergency calls can be made using the 112 number without a SIM card inserted.

Last number redial

You can redial the last number you called:
☛
Ensure that the standby screen is displayed and no phone number is shown.
.
briefly or close your phone.
.
6