Selection Of A Standard Setting „Mode 1 - Mode 5 - KERN and SOHN ABS-N Série Mode D'emploi

16.3.1 Selection of a standard setting „MODE 1 - MODE 5"
1. Invoke Data Output menu
 Press PRINT for 3 sec. in weighing mode.
2. Select function
 Press the navigation buttons ( ) repeatedly
until „COMM.SET" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly until the
desired mode „MODE 1 - MODE 5" is displayed. The
current setting is marked by the stability display ( ).
with ( ) on
without ( ) off
 Change using TARE.
3. Return to weighing mode
 Press ON/OFF repeatedly or for 3 s.
ABS-N_ABJ-NM-BA-e-1614 83