Balance Identification No - KERN and SOHN ABS-N Série Mode D'emploi

How to change settings
 Press TARE
 Press ON/OFF repeatedly or for 3 sec., the balance will
return into weighing mode

8.4 Balance identification no.

This setting is for the balance ID number that is output along with the adjustment report.
Call up menu
 In weighing mode press the MENU button twice
Select menu item
 Press the navigation buttons ( ) repeatedly until
„TOOLS" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „SYSTEM" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly until
„BAL.ID" is displayed.
 Press TARE, the currently set ID no. is displayed
(factory setting 0000).
Enter balance identification no. (max. 4 characters)
 Enter the desired ID no. using navigation buttons (see
chapter 3.1.1 „Numeric input").
 Press ON/OFF repeatedly or 3 sec., the balance will
return into weighing mode
ABS-N_ABJ-NM-BA-e-1614


27