Auto Power-Off Function (Automatic Switch-Off Function) - KERN and SOHN ABS-N Série Mode D'emploi

10.4 Auto Power-Off function (automatic switch-off function)

To save battery when function is enabled backlight of display will automatically switch
off after a defined time during which there was no change of load or activity.
1. Call up menu
 In weighing mode press the MENU button twice
2. Select function
 Press the navigation buttons ( ) repeatedly until
„TOOLS" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „SYSTEM" is displayed.
 Confirm with PRINT
 Press the navigation buttons ( ) repeatedly
until „AUTO.OFF" is displayed. The current setting is
marked by the stability display ( ).
Further steps depend on the desired setting:
Stability display
Function
( )
yes
ON
no
3. Set time, after which the display has to switch off
 Use the navigation key ( ) to enter the desired time in
minutes (max. 99 min.),
„Numeric input". see chpt. 3.1.1.
 Confirm with TARE.
4. Return to weighing mode
 Press ON/OFF repeatedly or for 3 sec.
ABS-N_ABJ-NM-BA-e-1614
set/update

Press PRINT and
continue with step 3.

Press TARE and
off
continue with step 3.
cancel
Press TARE and
continue with step 4.
continue with step 4.
33