Safety Instructions - Güde WM 560 TRI Mode D'emploi

Switch the engine off and remove the
socket plug before any work on the engine.
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Depending on application, use face
shield, safety goggles or safety glasses.
Wear safety cut through resistant shoes
with safety sole and steel toe !
Wear gloves!
Do not let other persons get near due to
foreign objects being thrown off. Mini-
mum safe distance is 15 m.
Warning against hot surfaces!
Danger of burns !
Warning against dangerous electric
voltage
Warning about inflammable substances
Warning against cutting injury
Risk of poisoning!
Use the appliance only outside, never use
it in confined and bad ventilated areas.
Never mount any metal cutting elements.
Prohibited smoking and open fire using.
Switch off the engine before any work on it.
Refuel the engine only when switched off.
Keep the machine out of reach of
children.
Keep dry at all times.. Never expose tool
to rain.
CE marking
Any damaged or disposed devices must
be delivered to appropriate collection
centres.

Safety Instructions

Keep children and other persons including animals in
a safe distance when using the appliance. Minimum
safe distance is 15 m.
Wear suitable protective clothing such as sturdy
shoes with non-slip sole, robust long trousers, gloves,
safety glasses and hearing protection!
Do not wear loose clothing or jewels. Hear, clothing
and gloves must be out of reach of moving parts
as they could get caught by the rotating parts. Do
not use the appliance when barefooted or in open
sandals.
Benutzen Sie das Gerät nie barfuß oder in leichten
Sandalen.
Tragen Sie Schutzhandschuhe, wenn dies notwendig
ist.
Do not use the appliance if you are tired, ill, under
influence of drugs, alcohol drinks or medicaments.
Use the appliance in broad daylight or in a well-lit
environment.
Avoid operating the equipment in wet grass, where
feasible;
Check carefully the terrain where the appliance is
being used and remove any items that could get
caught and be thrown away.
Check all screw and plug-in connections and
protective equipment if firm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
Check the cutting equipment function. Cutting
units should only be replaced in pairs.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
ENGLISH
23