Audio Settings; Bluetooth Mode; Cd Mode; Playback - Albrecht Audio DR 890 CD Guide D'utilisation

Masquer les pouces Voir aussi pour DR 890 CD:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

7.5.2. Audio settings

All stereo stations are played in stereo. For weak stations, this may result in a poor signal-to-noise
ratio. To play weak stations in mono, select FM>Audio settings: "Listen in mono only".

8. Bluetooth Mode

The DR 890 CD is able to connect to other Bluetooth sources and play their audio streams. Please
note that the maximum Bluetooth range is about 10 meters and the radio is not able to connect to
other Bluetooth headsets, but sources only, such as smartphones.
To enter Bluetooth Mode, press
When you select the Bluetooth mode, the device is entering the pairing mode. Turn on your
smartphone/tablet/other Bluetooth device to search for the radio. The Bluetooth pairing name of the
radio adapter is „DR 890 CD". If pairing is successful, the screen will show „Connected" and the DR
890 CD will start playing music from your device.
When DR 890 CD is waiting for pairing, there is a blinking Bluetooth icon at the bottom. If the pairing
is successful, it has a "beep" sound and the Bluetooth icon becomes steady.
Control the music playback from your Bluetooth device. To unpair from DR 890 CD, press and hold
MENU and choose BT disconnect or press and hold

9. CD Mode

DR 890 CD can playback CD-DA format audio CD-R/CD-RW discs that have been finalised* upon
completion of recording. It may fail to play some CD-R/CD-RW discs due to poor recording and wide
variation in quality of the CD-R/CD-RW disc.
*Finalising enables a CD-R/CD-RW disc to playback on audio players. A disc which has not been
finalised may have information added to it using a computer but may not always be playable.
To enter CD Mode, press
Press
to open the CD-tray and insert a disc with printed side facing up. Press
disc will be loaded automatically. The unit will check the CD type and load its track list. The display
will show 'Loading' during the CD is being read and will begin to play afterwards.

9.1. Playback

Use
or
to play the previous or next track, press and hold
Press
to pause the track. Press it again to resume. Press
To take out the CD, press

9.2. Repeat/shuffle

Short press REPEAT on the remote control to swap among normal playback, repeat one, repeat all
(and repeat folder for MP3 / WMA CD).
Bluetooth Input
Bluetooth
Today's Date:
23/08/2013
Bluetooth
to choose Bluetooth and press OK.
, choose CD and press OK
. You can press the number key to go to the selected track.
English
03:28
to unpair Bluetooth.
or
to rewind or fast forward.
to stop the track.
EN
again and the
45

Publicité

Table des Matières
loading

Table des Matières