Special Safety Directions - Grizzly AHS 4055 Lion Traduction De La Notice D'utilisation Originale

GB
order to check the machine for da-
mage.
- for an immediate check if the ma-
chine begins to vibrate excessively.
Such preventive safety measures reduce
the risk of starting the power tool acci-
dentaIly.
d) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are danger-
ous in the hands of untrained users.
e) Maintain power tools. Check for mis-
alignment or binding of moving parts,
breakage of parts and any other condi-
tion that may affect the power tool's op-
eration. If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) CAREFUL HANDLING AND USE OF
BATTERy DEVICES
a) Charge the batteries only in chargers
that are recommended by the manu-
facturer. Risk of fire if a charger that is
suitable for a specific type of battery is
used with other batteries.
b) In the power tools, use only the bat-
teries designed for the purpose. The
60
use of other batteries may result in inju-
ries and risk of fire.
c) Keep the unused battery away from
paper clips, coins, keys, nails, screws
and other small metal objects, which
could cause bridging of the contacts.
A short circuit between the battery con-
tacts may cause burns or fire.
d) If used incorrectly, liquid may leak
from the battery. Avoid contact with
this. In the event of accidental contact,
rinse off with water. If the liquid gets
into eyes, seek medical assistance.
Leaking battery fluid may cause skin ir-
ritations or burns.
6) SERVICE
• Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.

Special Safety Directions

1) SpECIAL SAFETy DIRECTIONS FOR
HEDGE TRIMMERS
• Keep all parts of the body away from
the cutter blade. Do not remove
cut material or hold material to be
cut when blades are moving. Make
sure the switch is off when clearing
jammed material. A moment of inatten-
tion while operating the hedge trimmer
may result in serious personal injury.
• Carry the hedge trimmer by the han-
dle with the cutter blade stopped.
When transporting or storing the
hedge trimmer always fit the cutting
device cover. Proper handling of the
hedge trimmer will reduce possible per-