Fulgor Milano FPRHD 362 TC Instructions D'utilisation Et Avis De Montage page 16

Fasten the hood by inserting the two screws
into the rear side of the appliance (Fig. 9).
After determining the height of decorative pipes,
fix the pipe support brackets either on the ceiling
or the wall at a centre distance of 813.5mm (for
the FPRHD 362 model) and 1118mm (for the
FPRHD 482 model) Fig. 10, then place the two-
decorative chimneys on the hood, lift the upper
chimney and fix it to the brackets previously posi-
tioned with the two screws provided (Figure 11).
WORKING
(Fig.12)
A: Light ON/OFF button
B: Speed indicators
C: Speed indicators
D: Speed increase
E: 10 Minute Timer
16