Fulgor Milano FPRHD 362 TC Instructions D'utilisation Et Avis De Montage page 14

Before carrying out any cle-
aning or maintaining opera-
tions, the appliance needs to
be removed from the electric
grid.
If the appliance is not provided
with a non-separable flexible
cable and plug, or with ano-
ther device ensuring discon-
nections from the grid, with an
opening distance between the
contacts of at least 3 mm, then
such disconnecting devices
must be supplied within the fi-
xed installation.
If the fixed appliance is equip-
ped with power cord and plug,
the appliance shall be instal-
led in a place where the plug is
easily reachable.
Before carrying out the instal-
lation of the appliance, please
check that all components are
not damaged. In such a case,
make contact with your retai-
ler and do not proceed with
the installation.
Should the product show any
anomaly, disconnect the ap-
pliance from the power supply.
When the range hood and ap-
pliances supplied with energy
other than electricity are si-
multaneously in operation, the
negative pressure in the room
must not exceed 4 Pa (4 x 10-5
bar).
14