Mounting The Luminaire Of Mounting Type "Lateral - Waldmann TAMETO Mode D'emploi

Mounting
Fig. 10: Setting the spring force of the rise-
and-fall pendants.
X Set the spring force of the rise-and-
fall pendants at the rotary handle A of
the cable reel to such a value that the
luminaire can be easily height-adjusted,
see Fig. 10.
X Connect the luminaire, see chapter 4
"Connection" , page 28.
X Slide the ceiling rose upwards and
screw it down on the thread of the
cable reel.
X Position the luminaire at the desired
height.
3.5 Mounting the luminaire of
mounting type "Lateral"
X Mount one side part on each side of
A
the luminaire, see chapter 3.2 "Mount-
ing the side parts" , page 24.
Fig. 11: Inserting the slide nuts.
X Insert the two enclosed slide nuts A
into the T-slots of the luminaire, see
Fig. 11.
C
Fig. 12: Mounting the brackets for mount-
ing type "Lateral" .
X Mount the enclosed brackets B on the
luminaire using the enclosed screws C
and the slide nuts and tighten the
screws, see Fig. 12.
ENG
A
B
27