Replacing The Lamp; Replacing The Lamp Of A Led Luminaire; Replacing The Lamp Of A Luminaire Equipped With A Fluorescent Lamp - Waldmann TAMETO Mode D'emploi

ENG
8.

Replacing the lamp

8.1 Replacing the lamp of a LED
luminaire
NOTES:
Luminaires with LED lamps are identi-
ƒ
fied by the letter Q in the model num-
ber, for example SAHZQ 88 R.
The luminaire is maintenance-free.
ƒ
A lamp replacement is not required.
If nevertheless a lamp should break
down, our service team can be
reached at:
Hotline: +49 (0) 77 20 / 6 01 - 170
E-Mail: service@waldmann.com
32
8.2 Replacing the lamp of a lumi-
naire equipped with a fluo-
rescent lamp
NOTE: Luminaires with fluorescent lamps
do not have the letter Q in the model num-
ber, for example SAH 154 D.
WARNING
Danger of death due to electric shock.
X Disconnect the luminaire from the
power supply.
X Allow the lamp to cool down.
Fig. 16: Opening the luminaire.
X Unscrew the screws A from one side
part of the luminaire, see Fig. 16.
X Remove the side part B.
Fig. 17: Pulling out the cover.
X Pull the prism cover C or the parabolic
grid out of the luminaire, see Fig. 17 .
Replacing the lamp
A
B
C