Switching On The Appliance For The First Time - Thermador DWHD770W Serie Notice D'utilisation

Switching on the appliance for the first
time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on the
appliance for the first time. The following text is indicated
on the display window at the top
Scroll with < >
Set with + -
Leave with setup 3 sec.
Settings
Switching on the appliance for
the first time
Language
Time format
Time setting
Water soft setting
Rinse aid setting
10
@
:
Factory setting Infotext
by pressing Info button
American English Language selection.
24h 12h or 24h.
12:00 Set the current time.
°E 0 - 8 soft Setting water hardness. When using Multitabs, select the
lowest setting.
Level 5 Amount of rinse aid affects drying.
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
1. Keep pressing button >
is displayed.
Make the selection with setting buttons + -
2.
Press and hold the Info button
3.
The selected setting has now been stored.
(
`
until the required setting
X
.
(8
for 3 seconds.