Thermador DWHD770W Serie Notice D'utilisation page 11

Settings
The dishwasher has been preset with certain settings for
your convenience. You can change these factory setting.
Change the setting as follows:
Open the door.
1.
Switch on ON/OFF switch
2.
( 8
Press Info button
3.
following text is indicated on the display window at the
@
top :
Scroll with < >
Set with - +
Leave with setup 3 sec.
Setting
Time setting
Time format
Time display
Language
Water soft setting
Rinse aid setting
Sensor setting
Extra dry
Eco forecast
Auto Power Off
Emotion Light
Emotion Light 1*
Emotion Light 2 *
Emotion Light 3 *
Time Remaining
PowerBeam *
®
Start Program
Signal volume
Button volume
Push 2x to open *
Wifi
Greeting
Network Connection
Factory setting
* depending on the features of your dishwasher
(
.
for 3 seconds until the
Factory setting
12:00
12h
Time
American English
°E 0 - 8 soft
Level 5
Standard
Off
Off
Off
On
On
On
On
On
Auto
Level 2
Level 2
Off
Off
On
Reset
Keep pressing button >
4.
is displayed.
Make the selection with setting buttons + -
5.
Press and hold the Info button
6.
The chosen setting has now been stored.
You have the option of resetting all changed settings
back to the original factory settings.
Note: When you reset your dishwasher to the factory
settings, you are taken directly to the settings for
switching on the appliance for the first time.
Infotext
by pressing Info button
Set the current time.
12h or 24h.
Show end of wash cycle with display "Finish in" or "Finish at".
Language selection.
Setting water hardness. When using Multitabs, select the lowest
setting.
Amount of rinse aid affects drying.
Adjustment of soiling detection for optimum cleaning result.
Improved drying for glasses and plasticware.
Show the water and energy consumption.
Appliance automatically switches off at end of rinsing process.
Interior light.
Brightness setting for interior light.
Color setting for interior light.
Visual signalling of faults.
While wash cycle is running, status information is projected onto
floor.
When switching on, Auto cycle is the default, or it can be set to
'last selected program.'
Volume of signal at end of wash cycle.
Volume when using buttons.
Requires two presses on door to open.
Switch current network connection.
When switching on the appliance, the brand logo can be dese-
lected.
Manual or Auto.
Resetting to the factory setting.
`
until the required setting
( 8
(
X
.
for 3 seconds.
11