Use For Intended Purpose; Safety Information - Gesipa PH 1 Mode D'emploi

GB
1.

Use for intended purpose

As described in these operating instructions, the blind rivet setting tool may only be used for the
purpose of setting blind rivets.
Observe the safety information!
2.

Safety information

• The blind rivet setting tool is to be used solely for the purpose of setting blind rivets.
• Never overload the tool; work within the specified working capacity.
• Do not use tool without material! The blind rivet could be flung from the device! Never turn
the tool towards yourself or towards other persons.
• Regularly check the compressed air lines to ensure they are fitted correctly and airtight.
• When carrying out maintenance work on the blind rivet setting tool and when the tool is not
in use, it should always be disconnected from the compressed air network.
• When working with the blind rivet setting tool, always wear protective goggles. Personal
protective equipment such as protective clothing, gloves, safety helmet, non-slip footwear,
ear protection and fall arresting device is recommended.
• The spent mandrel container must remain screwed on or attached during tool operation.
• Do not exceed the specified operating pressure for the tool.
• Dispose of the used hydraulic oil in accordance with valid environmental protection
regulations.
18