Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
1.
Overview (See images)
Item
A
B
C
D
E
F
G
H
I
J
K
2.
Use for intended purpose
As described in these operating instructions, the blind rivet setting tool may only be used for
the purpose of setting blind rivets. Observe the safety information!
3.
Safety information
•
The blind rivet setting tool is to be used solely for the purpose of setting blind rivets.
•
Never overload the blind rivet setting tool; work within the specified working capacity.
•
Do not use tool without material. The blind rivet could be flung from the blind rivet setting
tool. Never turn the blind rivet setting tool towards yourself or towards other people.
•
The spent mandrel container must be emptied in good time; overfilling will cause the blind
rivet setting tool to malfunction.
•
Never work without a mandrel evacuation hose. The spent mandrels are blown back-
wards out of the riveting tool at high speed after every riveting operation. There is a great
risk of injury!
•
Always secure the mandrel evacuation hose to the container correctly, as the spent
mandrels are blown out of the mandrel evacuation hose at high speed. There is a great
risk of injury!
•
Never use the blind rivet setting tool as a hammer.
•
Regularly check the compressed air lines to ensure they are fitted correctly and airtight.
14
Designation
Nosepiece
Steel head sleeve
O-ring
Jaw housing
Jaws
Trigger
Oil screw plug
Seal
Hanger
Oil screw plug
Seal
Abb.
1
1
1
1
1
1
2
2
2
3
3
Publicité
Chapitres
Table des Matières
Dépannage
