Functional Description - Abicor Binzel DAV Mode D'emploi

DAV
4.2 Storage

5 Functional description

1
AF 2.5
AF 4
1 Nm
10
9
1 Optional torch clamp
2 Cover
3 Counter support with pressure spring
Fig. 3 Functional description
Physical storage conditions in a closed room:
 Tab. 2 Ambient conditions for shipment and storage on page EN-10
2
4 Jaws
5 Housing
6 Cutter
7 Slide
The housing (5) is attached to the actuating side of the cylinder (9). The
housing(5) consists of the slide (7) with the cutter (6) and the
counter support (3).
Upon activating the wire cutter, the cylinder (9) actuates the slide (7), moving
it forward. At the same time, the counter support (3) clamps the free wire end
at the fixed jaws (4) by spring force and the cutter (6) on the slide (7)
completes the cylinder stroke and cuts off the wire. The optional switching
element with LED display (8) and torch clamp (1) monitor the position of the
pneumatic cylinder.
3
8 7
8 Optional switching element with LED
display
9 Cylinder
10 Mounting bracket
5 Functional description
6
EN - 13
4
5