5. Safety instructions
Read the operating instructions and safety information carefully. If you do not follow the safety
instructions and information on proper handling in this manual, we will assume no liability for any
resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
• The unauthorised conversion and/or modification of the product is not permissible for safety and approval
reasons.
• The surveillance camera is only intended to be used with a stabilised direct current of 12 V/DC. The inner
contact of the round low-voltage plug should be plus/+, the outer contact minus/-.
• This product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a dangerous toy for children.
• The product is designed for operation indoors and outdoors (IP66). However, it must never be used in or
under water, as this may destroy the interior components.
• The connector plugs on the surveillance camera's connection cable are not waterproof or watertight and
must therefore be placed in a dry indoor area or be protected accordingly.
• Make sure the connection cable does not get pinched, kinked or damaged by sharp edges.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, flammable gases, vapours
and solvents.
• Always handle the product carefully. Jolts, impacts or a fall even from a low height may damage the product.
• Do not place the product under any mechanical stress.
• Always observe the safety and operating instructions of any other devices which are connected to the
product.
• The IR light is invisible to the human eye. It is therefore not possible to tell whether an IR LED is on or
not. Due to the intensity of the in-built IR LEDs, there is a risk of damage to the eye if you look at it from
a short distance (<2 m).
Attention: IR LED light! Do not look directly into the IR LED light! Do not look into the beam directly or
with optical instruments!
• The use of this surveillance camera does not replace the personal supervision of children or people who
require special assistance, but serves only as a support to this supervision.
• If it is no longer possible to operate the product safely, stop using it and prevent unauthorized use. Safe
operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in adverse ambient conditions or
- has been subjected to any serious transport-related stress.
• Always comply with the accident prevention regulations for electrical equipment when using the product
in industrial facilities.
• Consult a technician if you are not sure how to use or connect the product.
• Maintenance, modifications and repairs must be done by a technician or a specialist repair centre.
• If you have questions that are not answered by these operating instructions, contact our technical support
service or other technical personnel.
15